Lighting installation from Controlled Power & Lighting Inc. in Sebastian, FL covers new fixtures, added lights, and replacements for homeowners and businesses who want better light in a room, a hallway, or outside. To get started, call or send a request describing which spaces feel dark, which fixtures need replacing, and what you would like the finished room to look like.

Maybe the kitchen has one dim bulb in the middle of the ceiling and you still can't see the counters. Maybe the porch light flickers every time it rains, or you bought a fixture online and the old wiring doesn't match what is on the box. These are common lighting problems, and most of them are solved with the right fixture, the right switch, and wiring that suits the load. A short description of the room and a few photos make the first conversation much easier.


Pendant lights above a kitchen island

Lighting Jobs We Handle

Lighting work ranges from a single swap to a full layout across several rooms. Typical requests in Sebastian include:

  • Ceiling fixtures: replacing builder-grade fixtures in bedrooms, dining rooms, and entries.
  • Recessed lights: adding can lights or slim LED downlights to kitchens, living rooms, and hallways.
  • Pendants and chandeliers: hanging heavier fixtures with secure mounting and correct wire connections.
  • Under-cabinet and task lighting: brighter work surfaces in kitchens, laundry rooms, and garages.
  • Outdoor fixtures: porch lights, wall lanterns, and entry lights, plus switching that makes them easy to use.
  • Switches and dimmers: new switch locations, multi-way switching, and dimmers matched to the bulbs.
  • Garage and workshop lighting: bright, even light where you do real work.

If you already have fixtures in hand, tell us. If you want help choosing, we can talk through placement and how many lights a room actually needs.


Signs You Need New Lighting

People usually call after living with a problem for a while. These are the signs that point to a lighting installation job rather than a bulb change:

  • A room has shadows, dark corners, or one weak light source.
  • Fixtures flicker, buzz, or run hot even with new bulbs.
  • The fixture is yellowed, cracked, or rusted, which is common on coastal porches.
  • You are remodeling and want lights moved, added, or put on dimmers.
  • A switch controls the wrong light, or you have to walk across a dark room to reach it.
  • The bulbs you want don't fit the old fixture style.

Flickering that affects several lights at once, a warm switch plate, or a breaker that trips can point to a wiring or circuit problem. That calls for an electrical repair visit before any new fixture goes up.


Recessed lighting illuminating a covered Florida lanai

Fixture Swap or New Wiring

Homeowners often lump all lighting work together, but the scope changes the job a lot. Knowing which one you need helps you describe it and compare quotes.

Replacing an Existing Fixture

When a fixture comes down and a new one goes up on the same box and the same switch, the job is usually simple. The main questions are whether the box can support the weight, whether the wiring is in good condition, and whether the new fixture suits the space.

Adding Lights or Moving Switches

New recessed lights, a new switch location, or lighting in a space that has none means running new cable and making new connections. This is where planning matters most, because the layout, the circuit load, and the ceiling or wall access all affect the result.

This page covers both fixture installs and new lighting installation. If your lights are out because of a failed breaker or damaged wiring, that is electrical repair or circuit breaker work, and we can look at it as part of the same visit when it makes sense.


Sebastian Conditions to Plan For

Sebastian's warm, humid climate and salt air near the coast are hard on outdoor and garage fixtures. Most exterior lights here should be rated for damp or wet locations, and finishes that resist corrosion tend to last longer than basic painted metal. Screws, gaskets, and sealed connections matter more outside than they do in a dry climate.

Storm season brings power surges and outages, and light fixtures with LED drivers can be sensitive to surges. If you are adding a lot of lighting, it is worth asking about surge protection, which is a separate service we also offer. Many homes in the area also have attics or block walls that affect how wiring can be routed, so access is something to look at before you commit to a layout.


How a Lighting Job Goes

Every home is different, but a typical job follows this order:

  1. Walkthrough: You show us the rooms, the fixtures you have or want, and where the switches are.
  2. Plan: We confirm fixture locations, switching, dimmer compatibility, and whether the existing circuit can carry the added load.
  3. Quote: You receive a written scope so you know what is included before work starts.
  4. Installation: Power is shut off at the panel, old fixtures come down, new wiring and fixtures go in, and everything is tested.
  5. Walkthrough at the end: You try every switch and dimmer and confirm the lighting looks the way you expected.

Signs of Quality Work

Whoever you hire, here is how to judge the result:

  • Secure mounting: Fixtures should sit flush, feel solid, and hang from a box rated for their weight, especially ceiling fans and chandeliers.
  • Matched parts: Dimmers should work with the bulbs you chose, with no buzzing, flicker, or limited range.
  • Clean connections: Wire connections should be tight, tucked neatly into the box, and covered with a plate or canopy that closes fully.
  • Right fixture for the location: Bathrooms, porches, and garages call for fixtures rated for moisture.
  • Tidy finish: Drywall cuts should be neat, trim should fit, and debris should be cleaned up before the crew leaves.

What Affects the Cost

Lighting jobs vary widely, so a fair quote starts with scope. These factors shape the price:

  • The number of fixtures and how complex each one is to hang.
  • Whether you are swapping existing fixtures or running new wiring.
  • Ceiling and wall access, including attic space, finished drywall, and block or masonry surfaces.
  • Height and difficulty, such as vaulted ceilings or outdoor fixtures above a second floor.
  • New switches, dimmers, or multi-way switching.
  • Fixtures supplied by you versus fixtures the contractor sources.
  • The condition of existing wiring and the panel, which can add work if something needs correcting.

A clear written quote should spell out which rooms and fixtures are included, who supplies each fixture, what patching or finishing is part of the job, how many visits to expect, and how changes will be handled if you add a light or the wiring turns out different than expected.


Questions to Ask Before Hiring

  1. Is the electrician licensed for this work in Florida, and is a permit needed? Rules depend on the scope, so ask who handles any permit.
  2. Are you insured? Ask for proof if the work involves ceilings, attics, or ladder work at height.
  3. What exactly is included in the quote? Get fixtures, switches, patching, and cleanup in writing.
  4. Can you install fixtures I buy myself? Some contractors prefer to supply their own, so confirm before you shop.
  5. How will scheduling and updates work? Ask how you will be told about arrival times and any changes.
  6. What happens if you find a wiring problem? You want to know how it will be explained and priced before it is fixed.

Common Questions

How Long Does a Lighting Installation Take?

It depends on how many fixtures are involved and whether new wiring is needed. A simple swap goes much faster than adding recessed lights to a finished ceiling. Describe the job when you call and we can tell you what to expect.

How Is the Price Worked Out?

Pricing is based on the number of fixtures, the type of work, access to the wiring, and any switches or dimmers. A written quote lays out the scope so you can compare it fairly.

Can You Install a Fixture I Already Bought?

Often yes. Make sure the fixture is suited to the location and that you have all the parts. Share the model or a photo so we can check compatibility with your box and switch.

How Often Should Lighting Be Replaced or Updated?

There is no set schedule. Many people update when fixtures look worn, when a room is remodeled, or when switching to LED. Outdoor fixtures near the coast may need replacing sooner because of salt and moisture.

Will You Have to Cut into My Walls or Ceiling?

A fixture swap usually doesn't. Adding new lights or switches can, depending on attic access and what is behind the surface. We explain the plan and any patching before work begins.

Do You Serve Areas Near Sebastian?

Yes. Beyond Sebastian we also serve Vero Beach, Micco, Grant-Valkaria, Fellsmere, Wabasso, Indian River Shores, Melbourne Beach, and Palm Bay. Call or send a request to talk through your project.

Have an Electrical Project? Let’s Talk.

Tell us what you need, from a flickering light to a full panel upgrade, and we’ll get back to you with a clear next step.